View HDSP-B47G_1248720.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Agilent HDSP-B42G, HDSP-B47G 18:88 0.56" Four Digit Seven Segment Displays
Data Sheet
Features * Excellent appearance * Slim font design * Mitered corners, evenly illuminated segments * Gray face for optimum on/off contrast Description The 18:88 0.56" Four Digit Seven Segment Displays incorporates a new slim font character design. This slim font features narrow width, specially mitered segments to give a fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast. All devices are available in either common anode or common cathode configuration with tinted green segments. Devices Green HDSP-B42G HDSP-B47G Description 4 Digit, Common Anode, Tinted Green, 0.56" Display 4 Digit, Common Cathode, Tinted Green, 0.56" Display * Choice of colors: green * Choice of character size: 0.56 inch * Characterized for luminous intensity
Package Dimensions (HDSP-B42G/B47G)
FRONT VIEW
8.00 (0.315) 7.80 (0.307) 10.00 7.00 (0.276)
RIGHT SIDE
5.00 0.50 (0.197) A DP3 A BF CE D DP2 D G BF CE D A G B C
14.20 (0.559)
19.10 (0.752)
19.10 (0.752)
15.24 (0.600)
B C
F E
G
PIN 1
PIN 7
12.7x3 38.1 (0.5x3 1.500) CANNOT READ INPUT!
8 - 1.50 (0.059)
TOP SIDE
51.20 (2.016)
BOTTOM SIDE
51.20 (2.016)
8.00 (0.315)
8.00 (0.315)
HDSP-XXXX YWW XZ COO DATE CODE LUMINOUS INTENSITY CATEGORY COUNTRY OF ORIGIN COLOR BIN
2.54 (0.100) 0.50 (0.020) 4.00 (0.157)
NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE 0.25 mm.
PIN 1 2 3 4 5 6 7 8 9 10 11 12
FUNCTION E D DP C G DIGIT 4 COMMON A/C B DIGIT 3 COMMON A/C DIGIT 2 COMMON A/C F A DIGIT 1 COMMON A/C
2
Internal Circuit Diagram (Common Cathode)
DIGIT 1 12 DIGIT 2 9 DIGIT 3 8 DIGIT 4 6
B
C
A 11
B 7
C 4
D 2
E 1
F 10
G 5
DP 3
Internal Circuit Diagram (Common Anode)
DIGIT 1 12 DIGIT 2 9 DIGIT 3 8 DIGIT 4 6
B
C
A 11
B 7
C 4
D 2
E 1
F 10
G 5
DP 3
Absolute Maximum Ratings Description Average Power per Segment or DP Peak Forward Current per Segment or DP DC Forward Current per Segment or DP Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wavesoldering Temperature for 3 seconds 1.59 mm below body
Note: 1. Derate above 40C at 0.33 mA/C for Green.
Green 65 100 25 -40 to +105 -40 to +105 3 250
Units mW mA mA C C V C
Electrical/Optical Characteristics at TA = 25C Device Series HDSP-B42G/ HDSP-B47G Parameter Luminous Intensity/ Segment (Digit Average) Forward Voltage/ Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Symbol IV Min. 2.000 Typ. 3.200 Max. Units mcd Test Conditions IF = 10 mA
VF PEAK d IR
2.20 565 570
2.50
V nm nm A
IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V
100
Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
3
IDC - MAXIMUM DC CURRENT PER SEGMENT - mA
IF - FORWARD CURRENT PER SEGMENT - mA
40 35 RJ-A = 770C/W 30 25 20 GREEN 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 TA - AMBIENT TEMPERATURE - C
100 90 80 70 60 50 40 30 20 10 0 0 1 2 3 4 5 GREEN
RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA FOR GREEN)
8
6
4
2 GREEN 0
0
5
10
15
20
25
30
VF - FORWARD VOLTAGE - V
IF - DC FORWARD CURRENT - mA
Figure 1. Maximum allowable DC current vs. ambient temperature.
Figure 2. Forward current vs. forward voltage.
Figure 3. Relative luminous intensity vs. DC forward current.
Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene,
carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027.
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2004 Agilent Technologies, Inc. June 30, 2004 5988-4820EN

▲Up To Search▲

Price & Availability of HDSP-B47G

	To Download HDSP-B47G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .